Why Water Absorbent Materials Can Help You Avoid Becoming A Statistic

Why Water Absorbent Materials Can Help You Avoid Becoming A Statistic

They say that statistics can prove anything and this may be the case, but it does appear that the average homeowner is highly likely to fall victim to water damage at some stage. It is best to be prepared, as they say that it’s a matter of “when” and not “if.” In a typical home, with as many as four bathrooms, one for each bedroom, a network of pipes will connect. As our homes get older, these pipes can start to show some deterioration and you never know who one of those joints is likely to fail. This is the time to make sure that you have water absorbent materials in these vulnerable areas.

You can pinpoint areas most likely to become a problem with water leakage, by doing a little bit of investigation around your home. Underneath the sink, around your water tanks or water closets — all these are areas for concern. Fitting water absorbent materials in these areas will help you to avoid the worst damage, should anything catastrophic happened.

Your water heater tank is probably the area of most concern, should leakage occurred. There is, of course, a significant volume within this tank and it tends to be located in an elevated position. The force of gravity that helps your water circulate throughout your home can be your enemy if something breaks. Before you know it, anything in the immediate vicinity and beneath can be ruined.

If you place water absorbent materials made of super absorbent polypropylene around the base of your water tank and connections, you can get a period of advance warning. These materials can absorb an amazing moment of moisture and will help you to fend off much of the damage. Of course you should make sure that you check to see if everything is okay as regularly as you can.

When you live in one location for an extended period of time, you tend to understand the foibles of the home, places where problems will occur from time to time. For example, you might know that your basement is vulnerable to seepage during extended times of wet weather. Obviously, you don’t want to leave this unattended and should place some water absorbent materials in the right places to avoid the buildup of mold and mildew, over time.

If you feel that you have prepared as much as humanly possible for the risk of damage from man-made creations, such as a burst pipe or a leaking water tank, you should turn to defense against mother nature. Whenever a winter or summer storm threatens, the side of the house that faces the predominant direction of the wind is most at risk. Garage doors or patio doors seem to be the worst when it comes to letting in the rain.

In the 1950s, two Italians named Natta and Ziegler succeeded in creating the product we now know as polypropylene, which is one of the most significant inventions ever. This product is used in a huge variety of different commercial products, due to its dexterity. It is known as one of the most absorbent materials available and can be found in many products designed specifically to absorb water in and around the home.

The beauty about water absorbent materials composed of polypropylene is that they can be used again and again, so if you find yourself trying to repel the advances of storm driven rains around your home, you simply need to wring out the water into a nearby drain and continue your defense.